Engine
- Cummins Tier III QSB 6.7 liter with electronic fuel injection, waist gate turbo and air to air after cooler
- 275hp at 2500 rpm
- 160 amp alternator
- Two - 31H series batteries
Fuel Tank
- 120 gallon
- Located on left side
Cooling
- Large section radiator, oil cooler and condenser - stacked design with swing out cores for easy cleaning
- 28" hydraulically driven fan
- Reversing fan optional
Engine & Transmission Location
- Lower right side - ISO-mounted to right side walking beam
Hydrostatic transmission
- Torq-trac heavy duty hydrostatic pumps
- Twin 100cc Sundstrand
- Spin on oil filters
Wheel drive motors
- 4 wheel drive
- Poclain model MS-18 Dyna+
- Optional with high torque cam ring available (will reduce road speed)
- 3 speed, shift on the go
Brakes
- Parking: 4 wheel std.
- Spring applied, hydraulic released
- Service - hydrostatic & foot actuated dynamic, 4 wheel brakes
Travel speeds
- Range 1: 0-14mph
- Range 2: 0-19mph
- Range 3: 0-29mph (cams/00)
- Range 3: 0-26mph (w/opt high torque cams/02)
Wheel tread width adjustment
- 108 to 156 inches
- Opt - 113 to 161 inches (3200T & 3200HT)
- Hydraulic adjustment standard |
Auxiliary hydraulic pump
- Closed center pressure compensated, Eaton pump with 2700psi operating pressure
- 31gpm
Front mounted cab
- John Deere 90 series cab
- Air ride with leveling valve
- Pressurized - heat & air conditioned
- Long windshield wiper - 2 blade & washer
- AM-FM-WX radio
- Tilt and telescoping steering wheel
- Deluxe air ride seat
- Charcoal filtration
Crop clearance
- 72 inches
Suspension
- Air~Flex hydraulic cylinders (2) with accumulators and leveling valves
- Left & right side walking beam suspension with travel in excess of 26 inches (+/-)
Steering
- Hydrostatic power steering with two steering cylinders and no tie rods to adjust
- Nitrosteel hydraulic cylinder shafts
- 13 to 15 foot turning radius
Product tank
- 750 or 1000 gal. poly, 1000, 1200, 1400 gal. stainless
- 1000 or 1200 gal stainless integrated with 65 gal foam tank and 110 gal. flushtank
- 3 gal. hand wash
Product pump
- Standard 9306C HM5C Hypro pump, 210gpm at 80 psi
- Optional 9305C HM3C Hypro pump 146gpm at 80 psi
- Optional 9307C GM10 Hypro pump 310 gpm at 80 psi
Rate Controller
- Raven 460 with serial port and GPS compatible
- RFM 60 flow meter (RFM 100 with high flow pumps)
- Hydraulic flow control to control pump volume
- Optional speed sensors - wheel drive, radar and/or GPS antenna |
Boom
- Front mount with nitrogen accumulator suspension
- Boom travel up/down: 27 to 107 inches
- Individual wing tilt
- Nitrosteel cylinder shafts
- 1in stainless steel boom lines with single non drip nozzle bodies (multiple head bodies optional)
- Nozzle body spacing available on 10, 15, 20 inches or 25cm
- 60, 60/75, 60/80, 60/90, 100 or 120 foot, 18/27, 18/30, 18/32 or 22/36 meter booms available depending on model
- Optional quick detach kit
Foam marker
- Richway 40 gallon with boom end mixing chamber
- Engine driven "on board" air supply
Tire size options
- 380/R46 142 A8/B field lug Titan
- 380/R46 142 A8/B highway lug Titan
- 380/90R46 155 A8/B field lug Michelin
- 320/90R46 148 A8/B Titan
- 320/90R50 156 A8/B Titan
- 320/90R54 154 A8/8 Titan
- 520/85R38 158 A8/B Titan
- 650/65R38 157 A8/B Michelin
- Size availability varies on depending on model
Dimensions
- Overall width narrow 142" (11'10")
- Overall width wide 190" (15'10")
- Overall length with boom unfolded 280" (23'4")
- Overall height 154" (12' 11")
- Crop clearance 72" (6')
- Shipping weight:
25,270lbs (3275 90', 1400 gal SS)
26,550lbs (3275 120', 1400 gal SS)
Shipping weights vary depending on model of sprayer boom size and accessories
Lighting
- Standard halogen lighting:
2 front high/low beam
6 front work lights, cab roof
2 front work lights, boom
2 side work lights, 2 rear work lights
- Optional halogen lighting:
2 high intensity front
2 side work lights, 2 rear work lights
Service
All hydraulic hoses and electrical wires are clearly marked for identification |
