Track: 73in (185.4cm)
Overall Height: 102in (2.59m)
Weight: 3,700lbs (1,678kg)
Length:
Overall (shipped): 224in (5.69m)
Overall (assembled): 347in (8.81m)
Width: 93in (2.36m) |
Hitch
Clevis type with 4 position adjustable offset tongue
Rows
One picking row; 24in or greater (61cm) row spacing
Cleaning System
Cleaning includes one 27 in (68.5cm) diameter fan and mechanical drive.
Center Conveyor
18in (45.7cm) chain and sprocket
Conveyor
Intake conveyor: 18in (46cm) wide rubberized belt chain with ¼in (3.2cm) cleats.
Elevator conveyor: 18in (46cm) wide rubber with 32in D.R. (7.6cm) cleats.
Cutter Blades
One circular blade with 8 sections driven by hydraulic motor.
Grip Belts
Two belts, each driven by a hydraulic motor, spacing adjustable.
Head Flotation
Method: The gauge wheel senses changes in ground contour and is adjustable to control the cutting height by adjusting hydraulic cylinder. Float: two coil springs reduce the weight on the gauge wheel. The hydraulic cylinder raises the gauge wheel. Control: spring tension can be adjustable. |
Tires
10.7 x 30.6in (27.2 x 77.7cm)
Gauge Wheel
Size: 11x15 (27.9 x 38.1cm)
Function: senses change in ground contour and adjusts head cutting height accordingly.
Height Control
Header height is controlled by a hydraulic cylinder from the tractor and can raise the gauge wheel off the ground for transport.
Capacity (Approx)
Harvesting Speed: 2 to 3 mph (32-4.8kph)
Ears/Hour: Up to 600 dozen per hour
Elevator
Overall Length: 12ft (3.65m)
Width: 18in (46cm)
Hydraulic System
Four hoses with ½in (2.54cm) ORB male thread. One low pressure PTO-driven hydraulic pump with filter. 27qt (25.5L) hydraulic reservoir.
Tractor Required
40hp minimum (30kw); 1 3/8"-6 spline 540rpm power take off (PTO); two auxiliary hydraulic circuits needed to power cutter height and head lift cylinders; stationary drawbar. |
