Engine
- Cummins Tier III QSB 6.7 liter with electronic fuel injection, waist gate turbo and air to air after cooler
- 215hp at 2500 rpm - peak 225hp at 2300rpm
- 160 amp alternator
- Two - 65 series batteries
Fuel Tank
- 100 gallon
- Located on left side
Cooling
- Large 4 section radiator - side by side design for more effecient and air flow and easier servicing
- Hydraulically driven fan
Engine & Transmission Location
- Lower right side
- ISO-mounted to right side walking beam
Hydrostatic Transmission
- Twin 75cc Sundstrand heavy duty hydrostatic pumps
Wheel drive motors
- 4 wheel drive
- Poclain MW14 Dyna+
- 3 speed, shift on the go
Brakes
- Parking: 4 wheel std.
- Spring applied, hydraulic release
- Service - hydrostatic & foot actuated dynamic internal wet disc, oil cooled
Travel speeds
- Range 1: 0-12mph
- Range 2: 0-18mph
- Range 3: 0-35mph (only when wheels are set at 108in or wider)
Wheel tread width adjustment
- 72 to 120 inches - stops at 72, 76, 80, 88, 108 and 120 inches
- Hydraulic adjustment standard |
Auxiliary hydraulic pump
- Closed center pressure compensated, Eaton pump with 2700psi operating pressure, 31gpm
Front mounted cab
- John Deere 20 series cab
- Pressurized - heat & air conditioned
- Windshield wiper
- AM-FM-WX radio
- Tilt and telescoping steering column
- Deluxe air ride seat
- Charcoal filtration
Crop clearance
- 50 inches
Suspension
- 4 wheel independent strut suspension with integrated air ride
- Fully enclosed & pressurized slide mechanism
- Suspension travel, +/- 4in
- 4 wheel independent air leveling valves
Steering
- Hydrostatic power steering with two steering cylinders and no tie rods to adjust
- Nitrosteel hydraulic cylinder shafts
- 18 foot turning radius
Product tank
- 800 gallon poly with full length V-shaped sump, baffles and dual agitation
- Opt 800 gallon stainless
- 3 gal. hand wash
Product pump
- Hypro 9306C-HM5, 210gpm at 80psi
Rate Controller
- Raven 460 with serial port and GPS compatible
- RFM 60 flow meter (RFM 100 with high flow pumps)
- Hydraulic flow control to control pump volume
- Radar speed sensor |
Boom
- Front mount with nitrogen accumulator suspension
- Boom travel up/down: 22 to 99 inches
- Individual wing tilt
- NitroSteel cylinder shafts
- 1in stainless steel boom lines with single non drip nozzle bodies (multiple head bodies optional)
- Nozzle body spacing available on 10, 15, 20 inches or 25cm
- 60, 60/75, 60/80, 60/90 foot or 18/27 meter booms available
- Optional quick detach kit
Foam marker (optional)
- Richway Versa Trac™ with boom end mixing chamber
- Engine driven "on board" air supply
Rinse System (optional)
- 100 gallon poly tank
- Two rinse balls in tank
- Full length rinse tube in stainless steel tank
Tire size options
- 320/90R50
- 380/85R46
- 525R1257 flotation
Dimensions
- Overall width narrow 134" (11'2")
- Overall width wide 138" (11'6")
- Overall length with boom unfolded 236" (19'8")
- Overall height 144" (12')
- Shipping weight:
20,610lbs (N2XP 90', 800 gal poly)
21,100lbs (N2XP 80', 800 gal SS)
Shipping weights vary depending on model of sprayer boom size and accessories
Lighting
- Standard halogen lighting:
2 front high/low beam
4 front work lights, 2 rear work lights
- Optional halogen lighting:
2 high intensity front
2 side work lights, 2 rear work lights
Service
All hydraulic hoses and electrical wires are clearly marked for identification |
